BTVJM - 9500ULTRA-HIDE FLAT LATEX HOUSE PAINT-WHITE
- MSDS: BTVJM
- Manufacturer: GLIDDEN COMPANY
- Product Name: 9500ULTRA-HIDE FLAT LATEX HOUSE PAINT-WHITE
- National Stock Number: 8010-00F036156
Product Identification
Product ID:9500ULTRA-HIDE FLAT LATEX HOUSE PAINT-WHITE
MSDS Date:03/31/1994
FSC:8010
NIIN:00F036156
MSDS Number: BTVJM
Responsible Party
CLEVELAND, OH 44115
US
Emergency Phone: 800-545-2643/216-826-5566
Info Phone: 216-344-8000/800-545-2643
Cage: 01PD6
Contractor
Telephone: 800-545-2643/216-344-8207
Cage: 01PD6
Ingredients
GLYCOL ETHERS, DIETHYLENE GLYCOL, 2,2-OXYBISETHANOL
CAS: 111-46-6
RTECS: ID5950000
Fraction By Weight: 5-10%
CLAY (KAOLIN), ALUMINUM SILICATE
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 10-20%
ACGIH TLV: 10 MG/CUM TOTAL DUST
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 5-10%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM FUME
HYDRATED ALUMINA, ALUMINUM HYDROXIDE, ALUMINUM OXIDE
CAS: 21645-51-2
RTECS: BD0940000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/CUM (DUST)
ACGIH TLV: 2 MG/CUM (DUST)
SILICON DIOXIDE, CELITE 322
CAS: 7631-86-9
RTECS: VV3100000
Fraction By Weight: 1-5%
OSHA PEL 80 MG/CUM
ACGIH TLV: 0.2 MG/CUM
TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN BY IARC
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5-10%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
TRACT, LUNGS, CNS DEPRESSION, RESPIRATORY PROBLEMS, ANESTHETIC,
PNEUMOCONIOSIS. SKIN: IRRITATION, DERMATITIS. EYES: IRRITATION.
INGESTION: GI DISTURBANCES/CNS DAM AGE/DEPRESSION/LIVER/KIDNEKY &
BLADDER DAMAGE/PULMONARY EDEMA, DEATH. OVEREXPOSURE: TOXICITY TO
LUNGS, SKIN ABSORPTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, LIGHTHEADEDNESS,
HEADACHE, NAUSEA, VOMITING, COUGHING, NARCOSIS, DEFATTING, REDNESS,
FATIGUE, DROWSINESS, DIARRHEA, ABDOMINAL PAIN, UNCONSCIOUSNESS,
CYANOSIS.
Medical Cond Aggravated by Exposure:EYE, SKIN, RESPIRATORY DISORDERS.
ASTHMA- LIKE CONDITIONS, KIDNEY, LIVER, NERVOUS SYSTEM DISORDERS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE & SUPPORT CONTINUED
BREATHING. SKIN: FLUSH W/WATER & WASH THOROUGHLY W/SOAP & WATER.
EYES: FLUSH W/PLENTY OF WATER, ALSO UNDER EYELIDS FOR 15 MINS.
OBTAIN MEDI CAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:SCC
Flash Point:NONE
Upper Limits:12.3
Extinguishing Media:DRY CHEMICAL/FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL & PROTECT EXPOSED
CONTAINERS. USE FULL PROTECTIVE CLOTHING, EYE PROTECTION, & SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
EXTREME HEAT/FIRE. MAY DECOMPOSE UNDER FIRE CONDITIONS EMITTING
IRRITANT/TOXIC GASES.
Accidental Release
Spill Release Procedures:VENTILATE AREA. COLLECT W/ ABSORBENT
MATERIALS. PLACE COLLECTED MATERIAL IN PROPER CONTAINER.
Handling
Handling and Storage Precautions:STORE BELOW 100F. KEEP FROM FREEZING,
KEEP CONTAINER TIGHTLY CLOSED & UPRIGHT WHEN NOT IN USE.
Other Precautions:USE W/ADEQUATE VENTILATION. DON'T TAKE INTERNALLY.
KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/SKIN/EYES &
BREATHING VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:PROVIDE DILUTION VENTILATION/LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES/FACE SHIELD
Other Protective Equipment:EYE WASH & SAFETY SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS THOROUGHLY AFTER HANDLING, & BEFORE EATING &
SMOKING.
Supplemental Safety and Health
HEALTH HAZ CONT'D: EXCESSIVE INHALATION OF FUMES MAY LEAD TO METAL FUME
FEVER CHARACTERIZED BY A METALIC TASTE IN THE MOUTH, EXCESSIVE
THIRST, COUGHING, WEAKNESS, FATIGUE, MUSCULAR PAIN, NAUSEA, CHILL S
& FEVER.
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.342
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:71.86
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, ALUMINUM, ZINC, MAGNESIUM, SODIUM, POTASSIUM.
Stability Condition to Avoid:FREEZING, FIRE & HEAT.
Hazardous Decomposition Products:CO, CO2, OXYGEN
Disposal
Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.